Vintage Revolution | Guitar analogue effects | The analogue revolution draws near

Master controller of your effects.

Integrate your favourite stomp boxes and DSP effect units into your sound effect chain using PedalPro's pre and post loops.

• Pre loop (Ext. Effect) Neutrik connectors operating at instrument level.
• Post loops (AUX Send/Returns) Neutrik connectors operating at instrument or line level.
• Internal high quality preamp and mixer for your post loops in line level configuration.
• Stereo Gain, Wet, Dry parameters are defined and saved in the preset.
• True relay bypass.
• Use via midi out connection, the MIDI CC and MIDI program change parameters to control your device.

The on/off switching of your loops is done by PedalPro's internal relays, providing maximum signal integrity and perfect sound quality.

The internal preamp allows you to adjust the signal levels to match the DSP effect dynamic up to +7dBu. In this way, any DSP-based effect with a +4dBu output level can be easily and comfortably integrated with the PedalPro.

To accommodate DSP units operating at standard +4dBu the send signal levels can be individually adjusted using parameters GsL, GsR (gain send level Left/Right ). Using the parameter WtL and WtR (Wet Left/Right) the return signal levels are individually readjusted to instrument level and mixed with the analog signals by means of the DrL, DrR (Dry level Left/Right) parameters. GsL, GsR, WtL, WtR, DrL, DrR and Aux type parameters are part of your preset definition and therefore are saved in the preset.

The AUX Send/Return loop can also be set to operate at instrument level, enabling you to connect up to two additional stomp boxes.

True bypass relays within the PedalPro will substantially improve your effect chain, disconnecting your external devices when they are not used in a preset. 

Expression control via MIDI out.

Use the MIDI out connection of your PedalPro to control your DSP unit via a program change message and MIDI CC 11 (expression).

With an expression pedal connected to your Pedalino Foot Controller, the MIDI CC 11 makes it possible for you to modify in real time any parameter of your external device.